Blog

Arkansas Bridge Demolition

Aggregate Technologies was the contractor of choice when a contractor needed to remove two Interstate 40 bridges spanning Shell Lake and Blackfish Lake in eastern Arkansas, just west of Memphis, Tennessee. ATI was involved in the early stages of the project and worked with the Project Manager and engineers to develop a demolition plan based on the lifting capacities of the […]

Read More

Safe and Rapid Airport Concrete Cutting

At Houston International Airport ATI crews saw cut and removed about 20 concrete panels 25’x25’ and 17” to 22” thick on the Terminal C project. These panels were removed due to cracking or the concrete otherwise failing and needing replacement. ATI operators cut each panel into 5’ x 5’ blocks with a 1’ relief cut and pulled each panel out […]

Read More

Hospital Water Tank Removal

A hospital in Houston required its existing fire suppression system water tank removed. The steel tank was 9’ tall by 25’ in diameter, with a layer of concrete encased on the inside of the tank, on a 12’ high concrete platform, in the basement of the hospital. A project of this type outdoors or in an industrial plant would typically […]

Read More

Dam Hardening using Core Drilling

Dams are without a doubt, some of the largest, most majestic, and critical man-made structures in the world today. Their uses are many, ranging from hydroelectric power to water storage and flood control. Dams have been in the news of late, as well, with the Oroville Dam in Northern California nearly failing. Had the dam unleashed its reservoir on the […]

Read More