A hospital in Houston required its existing fire suppression system water tank removed. The steel tank was 9’ tall by 25’ in diameter, with a layer of concrete encased on the inside of the tank, on a 12’ high concrete platform, in the basement of the hospital. A project of this type outdoors or in an industrial plant would typically […]
Category Archives: Interior Work
ATI operators are completing interior structural demolition work at Baptist Temple Church in the historic Heights neighborhood in Houston, Texas. The church, established in 1908, is undergoing renovation to reconfigure the building to fit the current needs of the congregation and add ADA compliance. Four structural concrete slab floors are being removed – ground level above basement, 2nd and 2nd […]
Aggregate Technologies, Inc. was recently contracted for a job at Rice University in Houston to remove a second floor structural slab for a new stairwell. The area to be removed measured 11’ x 31’. The workspace was confined – with only 8” on one side, 4’ on the other side, and about 6’ at each end. Technicians had to cut […]
Aggregate Technologies Tackles Silo Project in Mississippi Delta This wire sawing project in Convent, Louisiana, 50 miles west of New Orleans, presented a unique set of challenges. The job called for immediate mobilization to cut precision openings into cylindrical grain silos at a height of nearly 50 feet. To fulfill these stringent job requirements, interior and exterior scaffolding was installed […]
Multiple electric saws were deployed along with generators for power. Due to heavy traffic at the location during the day, all work was carried out during nighttime hours.